+- CodeIgniter Forums (https://forum.codeigniter.com)
+-- Forum: CodeIgniter 4 (https://forum.codeigniter.com/forumdisplay.php?fid=28)
+--- Forum: CodeIgniter 4 Support (https://forum.codeigniter.com/forumdisplay.php?fid=30)
+--- Thread: Route wont work (/showthread.php?tid=92261)
Pages:
1
2
Route wont work - 4usol - 01-02-2025
Hi,
i try to run a simple redirection but i failed.
Code:
redirect('access_denied/index/myval');it should rout to the controller in my base-folder "access_denied" to the funtion "index" and the values for the index-function with "myval".
routes.php
Code:
$routes->get('access_denied', '\App\Controllers\Access_denied::index'); //no result ->The route for "access_denied/index/myval" cannot be found
$routes->get('access_denied/(:any)', '\App\Controllers\Access_denied::index'); ->The route for "access_denied/index/myval" cannot be foundWhat i'm doing wrong?
Update
The Route: $routes->get('accessdenied/(:any)', 'Access_denied::index/$1');
dont work like it should be, i will always redirect to the shield/login page - maybe there is a problem with the settings about the shield-routes?
in the Filter Config is this:
Code:
public array $globals = [
'before' => [
// ...
'session' => ['except' => ['login*', 'register', 'auth/a/*', 'logout']],
],
// ...
];if i comment this line out, the route seems to work. Now i ask myselt how i can change the filter.
I want that all pages avivable outside a subfolder in the controllers named "myadminarea" this folder should be only accessable for loggedin users.
RE: Route wont work - captain-sensible - 01-02-2025
take out
Code:
\App\Controllers\
so its :
$routes->get('access_denied', 'Access_denied::index');and see if it helps, i think underscore is an allowed character although i would have written it camel case accessDenied
RE: Route wont work - 4usol - 01-02-2025
thanks i've update my code above, the problems seems to comes from the filter-config. May you have a look at this?
RE: Route wont work - michalsn - 01-02-2025
Adding access_denied* to the list should work
PHP Code:
public array $globals = [
'before' => [
// ...
'session' => ['except' => ['login*', 'register', 'auth/a/*', 'logout', 'access_denied*']],
],
// ...
];
RE: Route wont work - 4usol - 01-02-2025
Ok, but is there still a way to change the way it works?
At the moment all pages will "protected" i've not defined in the "except" Array.
Much easier for me it will be if i
- define a subfolder to protect - with all possible controllernames etc as a kind of wildcard "myfolder/*"
- all other pages wont protected and rund only like defined in the routes
Update
I decide to use the filter function not and add a own function to every page.
Now i need a bit help to create a dynamic routes for the logged-in area. I cannot define all possible routes, so i need to create a flexible route how works for all possible url-combinations
The idear will be something like that:
$routes->get('myfolder/(:alphanum)/(:alphanum)/(:alphanum)/(:alphanum)', '\App\Controllers\Myfolder\$1\$2$\$3\$4');
But this failed, is it possible to do something like that?
RE: Route wont work - michalsn - 01-02-2025
In that case, remove the entire session key and go down to the $filters property:
PHP Code:
public array $filters = [
'session' => ['before' => ['myfolder/*']],
];
RE: Route wont work - 4usol - 01-02-2025
Great, but now i've decide to use the filter function not and add a own function to every page.
Now i need a bit help to create a dynamic routes for the logged-in area. I cannot define all possible routes, so i need to create a flexible route how works for all possible url-combinations
The idear will be something like that:
$routes->get('myfolder/(:alphanum)/(:alphanum)/(:alphanum)/(:alphanum)', '\App\Controllers\Myfolder\$1\$2$\$3\$4');
But this failed, is it possible to do something like that?
RE: Route wont work - michalsn - 01-02-2025
Not a good idea. Just go with auto routing improved.
RE: Route wont work - 4usol - 01-02-2025
After enable the autoroute, my shield login wont work corretly.
For example the routes for "auth/a/handle" etc. runs into a 404-error.
May i have to go back to the beginning to create a kind of dynamically route...
...or is it possible to cretae the entries in the route.php dynmically after login by values from database (i have diffrent modules (with diffrent url-syntax) wich users can en/disable, for that i looking for a easy but flexible way)
RE: Route wont work - michalsn - 01-02-2025
Do you still have
PHP Code:
service('auth')->routes($routes);